The MJ-SFP10G-BXD-60 series single mode transceiver is small form factor pluggable module for optical data communications such as 10GBASE-LR/LW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The MJ-SFP10G-BXD-60 module is designed for single mode fiber and operates at a nominal wavelength of 1270nm DFB transmitter, 1330nm APD receiver and 1330nm DFB transmitter, 1270nm APD receiver; The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. The transceiver designs are optimized for high perform -ance and cost effective to supply customers the best solutions for telecommunication. The SFP+ MILJET BiDi uses only 1 Fiber for data reception transmission, and can reach up to 60Km with low insertion loss.
PRODUCTS
-
XFP 10G Transceivers (17)
The XFP MILJET Modules are products with the best components on the market, have certifications and are homologated by the largest Telecommunications Players in the World. Transceivers SFP + are for Capacity up to 10Gbps and can reach from 300m to 120km. We have several Application Models SR, LR, ER, ZR, LRM, DWDM, CWDM, LW, SW in Lengths from 850nm… -
SFP+ 10G Transceivers (21)
The SFP+ MILJET Modules are products with the best components on the market, have certifications and are homologated by the largest Telecommunications Players in the World. Transceivers SFP+ are for Capacity up to 10Gbps and can reach from 300m to 100km. We have several Application Models SR, LR, ER, ZR, LRM, DWDM, CWDM, LW, SW in Lengths from 850nm up… -
SFP 1.25G Transceivers (20)
The 1.25G SFP transceivers is a small, compact, self-connecting transceiver used for telecommunication and data communications applications. SFP modules are designed to support SONET, Gigabit Ethernet, Fiber Channel and other communication standards. Most SFP transceivers are used for Gigabit Ethernet. SFP if the next generation of GBIC and about half the size of the GBIC. All SFP tansceiver can come… -
QSFP28 100G Transceivers (3)
The 100G QSFP28 transceiver module is a high-density, high-speed product designed for 100Gbps applications. It has the same form factor as the QSFP+ transceivers. QSFP28 100G optics offers four channels of high-speed differential signals with data rates ranging from 25 Gbps up to potentially 40 Gbps, and finally meet 100 Gbps Ethernet (4×25 Gbps) and 100 Gbps 4X InfiniBand Enhanced… -
QSFP+ 40G Transceivers (6)
QSFP is short for quad (4-channel) small form-factor pluggable. It is a compact, hot-pluggable transceiver also used for data communications applications. QSFP+ evolved as the standard to support 10Gb/s data rates per SFF-8436. Compared with QSFP+, QSFP products support Quarter Small Form-factor Pluggable with the different data rate so that there is no change in the product solution. Nowadays, QSFP+… -
MTP/MPO Fiber Optic Cables (8)
We supply MTP and MPO fiber optic cables. These are available in Female to female or a male to male and male to female configurations. The male version has MTP pins. These can be made with 12 fiber MTP connectors, 24 Fiber MTP connectors, 48 Fiber MTP connector variations. We use USConec MTP fiber optic connectors for all of our… -
Fiber Optic Patch Cords (20)
Fiber optic patch cords are short distance fiber capped with connectors at both ends for easy installation at patch panels, optical switches, and telco equipment. We are a leading supplier of fiber optic patch cords including: single mode and multimode OM1, OM2, OM3 and OM4 These are available outfitted with LC, SC, or ST connectors in PC, UPC, and APC… -
DAC & AOC Cables (23)
DAC cable and AOC cable are widely applied in storage area network, data center, and high-performance computing connectivity, etc. AOC vs. DAC: The correct choice can be made when you are clear about the advantages and disadvantages of each. MILJET provides various kinds of high speed interconnect DAC assemblies including 10G SFP+ Cables, 40G QSFP+, 100G QSFP28 Cables. DAC or…
Product Details:
10GBASE-BXD SFP+ BiDi Tx1330/Rx1270nm 60km LC DDM
Vendor Name:
MILJET SOLUTIONS, INC.
Part Number:
MJ-SFP10G-BXD-60
Wavelength:
Tx1330nm / Rx1270nm
Data Rate:
10.3125Gbps
Formfactor Name:
SFP+
Max Distance:
60Km
Optical Monitor DOM:
Yes
Cable Type:
SMF Single Mode Fiber
Optical Components:
DFB/APD Laser Bi-Directional
Connector:
LC Simplex
Receiver Sensitivity:
<-20dBm
TX Power:
1~6dBm
Protocols:
MSA, RoHS Compliant & IEEE 802.3
Temperature Range:
0 to 70°C (32 to 158°F) | Single +3.3V
QUANTITIY:
- Arista Networks
- Alcatel-Lucent
- Aruba
- Avaya/Nortel
- Brocade
- Cisco
- Compaq
- Ciena
- Dell
- D-Link
- Datacom
- Extreme
- Enterasys
- Force10
- Fortinet
- FiberHome
- Huawei
- HP
- H3C
- Harmonic
- Hatteras
- Intel
- IBM
- 3Com
- Juniper
- Linksys
- Meraki
- Mikrotik
- Netgear
- Raisecom
- Tplink
- Ubiquiti
- ZTE
- Zyxel

Add Products with certified quality, with high standard of the best components worldwide recognized.




