40GBase-SR4 QSFP+, 850nm, 150m, Multimode, Connector MTP®/MPO, DDM, Optical Transceiver Module

40GBase-SR4 QSFP+, 850nm, 150m, Multimode, Connector MTP®/MPO, DDM, Optical Transceiver Module

The MJ-QSFP40G-SR4 QSFP Modules support link lengths of 100 meters and 150 meters, respectively, on laser-optimized multimode fibers. It primarily enables high-bandwidth 40G optical links over 12-fiber parallel fiber terminated with MPO/MTP® multifiber female connectors. It can also be used in a 4x10G breakout mode for interoperability with 10GBASE-SR interfaces up to 100 and 150 meters on OM3, OM4 and OM5 fibers, respectively. The worry-free 4x10G mode operation is enabled by the optimization of the transmit and receive optical characteristics of the MILJET QSFP-40G-SR4 to prevent receiver overload or unnecessary triggering of alarm thresholds on the 10GBASE-SR receiver, and at the same time is completely interoperable with all standard 40GBASE-SR4 interfaces. * Minimum cabling distance is 0.5 meters for -SR4 and -CSR4 modules.


Manufacturer Name: MILJET SOLUTIONS, INC. Florida USA
Part Number: MJ-QSFP40G-SR4
Model Format: QSFP+ (Quad Small Form-factor Pluggable)
Data rate/capacity: 41.25Gbps
Maximum Distance: Up to 100m in OM3 or 150m OM4.
Wavelength: 850nm VSCEL Laser (4 channels 10G 850nm)
TX Power/Power: -7.6 ~ 1dBm
RX Receiver Sensitivity: < -9.5dBm
Interface: MTP/MPO Female.
Cable Type: Multimode Fiber (MMF) OM3, OM4 and OM5.
MTBF: 1,649,326 hours
DOM/DDM Optical Digital Monitor: Yes
Hot-swappable: YES
Dimensions/Weight: 13mm x 72mm x 18.4mm – 32g
Temperature Range: 0°C to +70°C | Single +3.3V
Compliance: ISO9001, FCC, CE, RoHS, QSFP+ MSA, Class 1 FDA, Infiniband QDR, IEEE 802.3ba.

Condition: NEW in Box
Lifetime Warranty (with conditions)
Compatible with: Cisco, Mikrotik, Ubiquiti, Tp-link, D-Link, Arista, Huawei, ZTE, FiberHome, Trendnet, Linksys, Netgear, Zyxel. For other brands please contact us.

For a quote, contact us.

Where are we ?


© 2021 All rights reserved Miljet - Network Connections​