The MJ-QSFP100G-ZR4 transceiver modules are designed for use in 100 Gigabit Ethernet links on up to 80km of single mode fiber. 100G-QSFP28-80 is Multi-Vendor MSA Compatible 100GBASE-ZR4 QSFP28 (Quad Small Form-Factor Pluggable 28) Transceiver, operating over pair of single-mode optical fiber with four independent optical communication lanes, separated from each other using LAN WDM technology. Module has minimum guaranteed optical budget of 27 dB (with host FEC), which in most cases is enough to reach 80km distance (with host FEC) and 40km distance (without host FEC) using single-mode cable. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. 100G QSFP28 uses EML cooled 4x25Gb/s LAN WDM TOSA (1295.56, 1300.05, 1304.58, 1309.14nm) laser transmitters and 4x25Gb/s SOA+PIN receivers. Module support DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. Additionally module supports KR4 FEC (Forward Error Correction) function which will help receiving side detect and correct bit errors and improve the overall quality of the link.
Manufacturer Name: MILJET SOLUTIONS, INC. Florida USA
Part Number: MJ-QSFP100G-ZR4
Model Format: QSFP28 (Quad Small Form-factor Pluggable)
Data rate/capacity: 103.125Gbps (4x 25.78Gbps)
Maximum Distance: 80km
Wavelength: 1295~1310nm (4 x EML LAN WDM TOSA)
Tx Power/Power: 2~6.5dBm (EML)
Rx Receive Sensitivity: < -28dBm
Average Receiver Sensitivity (Max) Each Lane: -7dBm
Receiver Type: SOA+PIN
Forward Error Correction (FEC): Host FEC Supported
Receiver Overload: 5.5dBm
Interface: LC Duplex Connector (Polish Indicated PC or UPC)
Cable Type: Single-Mode Fiber (SMF)
MTBF: 4,578,324 hours
DOM/DDM Optical Digital Monitor: Yes
Dimensions/Weight: 13mm x 72mm x 18.4mm – 34g
Temperature Range: 0°C to +70°C | Single +3.3V
Compliance: ISO9001, FCC, CE, RoHS, MSA, IEEE 802.3bm, Infiniband FDR, 100GBASE Ethernet.
4 LAN WDM Seperated 1310nm Lanes (15.66 nm 1294.53 – 1310.19nm) (L0 Tx center 1295.56nm, L1 Tx center 1300.05nm, L2 Tx center 1304.58nm, L3 Tx center 1309.14nm)
Condition: NEW in Box
Compatible with: Cisco, Mikrotik, Ubiquiti, Tp-link, D-Link, Arista, Huawei, ZTE, FiberHome, Trendnet, Linksys, Netgear, Zyxel. For other brands please contact us.
© 2021 All rights reserved Miljet - Network Connections